Skip to main content

Free tool

Hybrid battery health check

Paste your block voltages from Dr. Prius, Hybrid Assistant or Torque and see the spread between blocks, which ones are low, and what to do next. It runs on your phone; nothing is sent anywhere.

Your app should show 14 block voltages, each around 14.40 V nominal (a little higher at rest, lower under load).

Paste them however your app gives them — one per line, separated by spaces or commas, or lines like “Block 1: 14.52”. The numbers stay on this page: nothing is sent anywhere.

Enter at least two block voltages to see the spread. Not sure what yours look like? Tap “Fill an example” to try it.

How it reads your numbers

Under 0.3 V

Blocks close together

No weak block shows in these numbers. Re-check now and then, and under load.

0.3–1.0 V

Weak block(s) likely

Toyota's battery computer treats this as an imbalanced pack. Often one or two blocks, not the whole battery.

Over 1.0 V

A module has likely failed

A module in the low block has most likely failed. Get the pack tested before buying anything.

The spread is the highest block minus the lowest. A block is flagged low when it sits 0.3 V or more below the highest one.

How to get your block voltages

  1. Plug a Bluetooth OBD2 adapter into the port under the dashboard, on the driver's side.
  2. Open an app that reads hybrid block voltages — Dr. Prius, Hybrid Assistant, or Torque with a hybrid plugin — and connect it to the adapter.
  3. Note the voltages with the car on and in Park. Then note them again while accelerating hard or climbing (have a passenger read them), or run the app's load test.
  4. Copy or type them into the boxes above, in block order.

A screening aid, not a diagnosis

This tool only sees the numbers you enter. It cannot see the 12V battery, the cooling fan, the wiring or how the readings were taken, and app readings can lag or round. An even spread does not guarantee a healthy pack, and a bad spread is a reason to test, not to buy a battery. A full pack test is what settles it. About our battery diagnostic.

If the pack does need replacing, our hybrid battery replacement cost by car table lists the price for every car we publish one for.

Health check questions

What is a block voltage?
Your hybrid battery is a chain of modules. The car's battery computer does not watch each module; it reads them in pairs, called blocks — 14 of them on a Toyota Prius 2010–2015. Apps like Dr. Prius and Hybrid Assistant show those block voltages live.
What spread is normal?
Under load, a spread under 0.3 V between the highest and lowest block is a healthy-looking pack. Over 0.3 V is an imbalanced pack, usually one or two weak blocks. Over 1 V means a module in the low block has likely failed.
Why test under load?
A tired block can read almost the same as the others while the car sits still. Draw current — accelerate hard, climb a hill, or run your app's load test — and the weak block drops further than the rest. That drop is what the battery computer reacts to.
Does this tool send my numbers anywhere?
No. The check runs in your browser. The voltages you type or paste are not sent, saved or seen by us. If you want us to look at them, text them to us.
Is this a diagnosis?
No. It is a screening aid that looks only at the numbers you enter. A full pack test measures each block under a controlled load and also checks the 12V battery and the cooling, which is where a fault that looks like a bad pack sometimes turns out to be.

More hybrid battery questions, answered

Want someone to look at your numbers?

Text us your block voltages and your car, or book a pack test. We'll tell you plainly whether it's a block, the pack, or something else.

Call833-995-7966TextSchedule a repair